Sleek And Stylish With A Touch Of Glass This is a perfect match with its stainless steel and glass panel that would suit any new kitchen design. At 90cm wide, this flat glass chimney cooker hood would look fantastic over any 5 burner gas hob and is a great upgrade from a standard chimney hood. Style does not get in the way of performance and this hood is guaranteed to keep your kitchen fresh all day long. The 3 fan speeds can be controlled by the push buttons along the front. This is where you also operate the lighting. This flat glass design provides 2 lights situated on the bottom of the cooker hood which is ideal for nicely illuminating your hob area, giving you a stress free cooking experience. The aluminium grease filter can be easily removed when it comes to cleaning. All you need to do is simply pop it in the sink to soak in soapy water or put in the dishwasher every 2 to 3 weeks to maintain optimum extraction. Add a touch of glass to your existing kitchen with this glass and stainless steel combination. Please Note This hood can either be vented to the outside or can bere-circulated. If you wish to vent to the outside you will need to purchase a ducting kitART00820 If you want tore-circulatethe air then you will need to purchase these carbonfiltersART00801 We do not offer an installation service. If you are looking for an installer, please check out www.myappliances.net/installation This appliance does not come with a plug. A cable is attached and we recommend fitting this to a fused spur unit. A minimum of750mmclearance is required above a gas hob and650mmabove an electric hob. Chimney sections come complete with the hood. Please refer to the specification sheet for yourspecific size. Please check the dimensions before you purchase. Items that do not meet your measurements must be returned at your own cost. Please do not organise fitters or book days off work for the installation of appliances until you have received your products. We cannot be held liable for any costs incurred relating to this.